Product Description
Quest Falcon Model Rocket Kit - Q1009 (Q1009)
Note: Model Kit Assembly Required
The Quest Falcon is an impressive design that is easy to build and fun to fly. Features a plastic nose cone and one-piece molded fin unit. Parachute recovery gently returns your rocket for one exciting flight after another! Includes both 18mm and 24mm motor mounts.
Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3 hours.
This kit requires assembly. Hobby glues, finishing supplies, building tools, launch system and rocket motors for launching are not included.
Launch supplies sold separately. Flying with 24mm rocket motors requires the AeroTech Mantis Launch Pad (89281), AeroTech Interlock Launch Controller (893891), Enerjet rocket motors with FirstFire™ Initiators and Recovery Wadding. A 12-volt battery source is required for the AeroTech Interlock Launch Controller - Not Included.
Launch supplies sold separately. Flying with 18mm rocket motors requires the Complete Launch System (Q7700), Quest Q-Jet™ rocket motors with FirstFire Micro™ Initiators and Recovery Wadding. One 9-volt, snap-top, Lithium battery is required for the Q2 Launch Controller - Not Included.
Recommended for ages 12 to adult. Direct adult supervision is suggested for those under 12 years of age when building or flying model rockets.
Features:
- Skill Level: Beginner Modeler
- Maximum Height: 1200ft
- Self-adhesive Decals
- Uses Quest Q-Jet™ 24mm White Lightning™: D22-4W (1st flight), D22-7W, D22-10W E26-7W, E26-10W rocket motors.
- Uses Quest Q-Jet™ 18mm Black Max™: C12-4FJ (1st flight), C12-6FJ, D16-6FJ rocket motors.
- Uses Quest Q-Jet™ 18mm White Lightning™: C18-4W (1st flight), C18-6W, D20-6W rocket motors.
- Other brands of model rocket motors, with a similar motor type (power) designation, should be OK for use in this product.
Specification:
- Skill Level: 1
- Length: 24 in. (60.6 cm)
- Diameter: 1.378 in. (35 mm / T35)
- Weight: 2.26 oz. (64 g)
- Recovery: 14 in. Parachute
- Fins: Plastic Fin-unit
- Décor: Self-adhesive Decals
- Flights up to 1200 ft. (366 m)
Needed to Complete:
- Glue/Plastic Cement
- Launch System
- Rocket Motors
Includes:
- (1) Model Rocket Kit
