Product Description
Traxxas TRX-4M 1/18 Scale Ford Bronco RTR, White
BIG FUN AND ADVENTURE IN A SMALLER TRX-4
Introducing TRX-4M, a new way to experience all the fun, adventure, and scale realism of the TRX-4 in a 1/18 platform. TRX-4M bridges the gap between the small crawler scene and 1/10 scale quality and performance. Oil-filled shocks, steel frame rails, and a smooth running drivetrain give it true outdoor capability over rocks and through grass and streams. The tight turning radius and precise throttle control give it fantastic indoor maneuverability.
Features
- Officially Licensed Ford® Bronco Clipless Body
- Highly-detailed ABS hard body
- Molded-in color won’t chip or flake
- Tough fender flares and rock sliders
- Realistic side mirrors, door handles, & wipers
- LED bumper lights
- Heavy-duty latching clips
- Hold tightly on the trail
- Release in just seconds
- Highly-detailed ABS hard body
- ECM-2.5™ Electronic Control Module
- Incorporates ESC, receiver, and LED controller in one chassis
- Fully waterproof for all-weather fun
- Three drive profiles
- Sport Mode — forward / brake / reverse
- Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral
- Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake
- Traxxas EZ-Set® one-button setup
- Built-in Pro Scale® LED functionality
- Two stage low voltage protection (LVD)
- Motor overload protection
- TQ™ 2.4GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Titan® 180 87-Turn Brushed Motor
- Fixed gear mesh doesn’t require adjustment
- Forward mounting position for improved crawling dynamics
- Heavy-Duty Steel Ladder Frame
- Deep C-channel design
- Thicker center section for maximum rigidity
- Rails run from bumper to bumper
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Solid steel axles
- Spool-equipped front and rear axles
- Heavy-duty CV center driveshafts
- Low-CG Battery Tray
- Concentrates weight lower for improved stability
- Wide rubber strap secures battery in place
- Optional Transmission Ratios (sold separately)
- Optional Low Range or Speed Gearing transmissions
- Modular design swaps out in minutes
- Steering
- Heavy-duty 2065T steering servo
- Metal main gear
- Superior 45° steering angle
- Direct steering (no servo saver)
- Heavy-duty 2065T steering servo
- Suspension
- Triangulated 4 link front and rear
- Heavy-duty rod ends
- Oil-Filled GTM™ Shocks
- Provides smooth controlled damping
- Realistic driving body movements
- Adjustable pre-load spacers
- Easily refreshed with available rebuild kits
- Wheels and Tires
- Highly-detailed 1” wheels
- 7 mm hex
- Replica BF-Goodrich® Mud Terrain T/A® KM3 tires
- Trail-tuned rubber compound
- Highly-detailed 1” wheels
- Battery and Charger Included
- High-capacity 2-cell LiPo battery with iD®
- 7.4 volts
- 750 mAh for over an hour of run time
- 2-amp USB-powered charger
- iD® technology for faster, safer charging
- High-capacity 2-cell LiPo battery with iD®
- Low-Maintenance Self-Lubricating Bushings
- Durable Hex hardware
Model Specs
- Model Type: Trail / Crawler
- Model Skill Level: 1
- Scale: 1/18
- Weight: 1.03 pounds (468 g)
- Length: 10.3 inches (262 mm)
- Width: 4.9 inches (124 mm)
- Front Track: 4.9 inches (124 mm)
- Rear Track: 4.9 inches (124 mm)
- Height: 4.6 inches (117 mm)
- Wheelbase: 6.1 inches (155 mm)
- Center Ground Clearance: 1.12 inches (29 mm)
- Drivetrain: Shaft-driven 4WD
- Transmission: Single speed direct drive
- Differential Type: Locked spool
- Approach Angle: 54° (Bronco)
- Breakover Angle: 45° (Bronco)
- Departure Angle: 48° (Bronco)
- Shock Length (front and rear): 2.0 inches (51mm)
- Hex Size: 7mm
- Wheels (front and rear): 1.0 x 0.49 inches (25.4 x 12.5mm)
- Tires (front and rear): 2.2 x 1.0 inches (57 x 25.4mm)
- Electronic Control Module: ECM-2.5™ (Combo ESC, Receiver, Lighting Control*)
- Motor (electric): Titan® 180 87T
- Differential Type: Fully Locked; 2:1 Axle Ratio
- Chassis Structure/Material: Steel Ladder Frame with Nylon Composite Crossmembers
- Brake Type: Electronic “Hill Hold”
- Drive System: Shaft-Driven 4WD
- Steering: Axle-Mounted Servo
- Gear Ratio (Internal): 11.38
- Gear Pitch: 64-pitch
- Servo(s): 2065T
- Radio System: TQ 2.4 GHz 2-channel transmitter
- Battery Compartment Specs: 51 mm X 31 mm
Motor Specs
- Motor Name: Titan 180
- Motor Type: 87-turn brushed motor
- Motor Weight: 1.16 ounces (33 g)
- Motor Length: 1.66 inches (42 mm)
- Motor Diameter: .81 inches (21 mm)
ESC Specs
- ESC Name: ECM 2.5™
- ESC Type: Brushed
- Input Voltage: 2s LiPo
- Case Size: 1.26in W x 1.79in D x 0.60in H
- Weight: 0.92oz (26g)
- BEC Voltage: 6.0 VDC
- BEC Current: 1A
- Low Voltage Detection (LVD): 2-Stage
- Transistor Type: MOSFET
- Motor Overload Protection: 2-Stage
- Profile Selection: Sport Mode: 100% FWD, 100% Brakes, 100% REV
- Trail Mode: 100% FWD, 100% Brakes, 100% REV, Trail-Tuned Brake on Neutral
- Crawl Mode: 100% FWD, 100% Instant REV, 100% Brake on Neutral
Includes
TRX-4M® Ready-To-Race® model
Licensed ABS hard body
Titan® 180 87-turn motor
ECM-2.5™ Electronic Control Module
TQ transmitter
7.4 volt 750mAh 2-cell LiPo battery
2-amp USB fast charger with iD®
High quality maintenance tools
TRX-4M® Ready-To-Race® model
Licensed ABS hard body
Titan® 180 87-turn motor
ECM-2.5™ Electronic Control Module
TQ transmitter
7.4 volt 750mAh 2-cell LiPo battery
2-amp USB fast charger with iD®
High quality maintenance tools
What You’ll Need
(4) AA alkaline batteries for the transmitter
(4) AA alkaline batteries for the transmitter
Product Videos
Videos Hide Videos Show Videos
Custom Field
swym-disabled true
Color White
