Product Description
For Breaking in a Brushed Motor, Best method is run the motor on low voltage less than 3 volts. Start with a drop or two of oil on each bushing or bearing and a drop or two of comm drops on each brush. About half way through the break in add another drop or two of comm drops. For a sealed can motor like a Tamiya Mabuchi Motor I would run it for at least 1 hour. For a Rebuildable Brushed Motor with stock or upgraded brushes run the motor for about 30 minutes If you have a motor mount to hold the motor add a small fan to motor shaft to blow air through the motor to keep it cool. When finished clean motor with electric motor spray and re-oil the bearings or bushings Adding one drop of comm drops before a run will add a little performance, but brushes will wear quicker.
Features:
- Add drop or two on the commutator every run will increase power. Great to use when breaking in your new brushes. Lubes commutator and keeps brushes from burning. Comes in a 1/2oz (15ml) Needle Tip Bottle
Includes:
- (1) 15ml Comm Drops
