ProTek RC 8103 4-40 x 5/16" "High Strength" Button Head Screws (10)

ProTek RC 8103 4-40 x 5/16" "High Strength" Button Head Screws (10) These are made from standard grade 8 steel which has a minimum tensile strength of 180,000 PSI. These screws are the strongest you can get and are suitable for the most demanding...

ProTek RC 8102 4-40 x 1/4" "High Strength" Button Head Screws (10)

ProTek RC 8102 4-40 x 1/4" "High Strength" Button Head Screws (10) These are made from standard grade 8 steel which has a minimum tensile strength of 180,000 PSI. These screws are the strongest you can get and are suitable for the most demanding...

ProTek RC 8101 4-40 x 3/16" "High Strength" Button Head Screws (10)

ProTek RC 8101 4-40 x 3/16" "High Strength" Button Head Screws (10) These are made from standard grade 8 steel which has a minimum tensile strength of 180,000 PSI. These screws are the strongest you can get and are suitable for the most demanding...

ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo

ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo This is the ProTek R/C 100T Digital Torque Metal Gear Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations...

ProTek RC "Prodigy 66 Duo AC/DC" LiHV/LiPo Battery Balance Charger (6S/6A/50W)

ProTek RC "Prodigy 66 Duo AC/DC" LiHV/LiPo Battery Balance Charger (6S/6A/50W) Dual Channel Outputs + LiHV Compatibility  The ProTek R/C "Prodigy 66 Duo AC/DC" LiHV/LiPo/LiFe/NiMH AC/DC Battery Charger is a dual port AC/DC charger that can...

ProTek RC "Prodigy 610ez AC/DC" LiHV/LiPo Balance Battery Charger (6S/10A/100W)

ProTek RC "Prodigy 610ez AC/DC" LiHV/LiPo Balance Battery Charger (6S/10A/100W) The ProTek R/C "Prodigy 610ez AC/DC" LiHV/LiPo/LiFe/NiMH AC/DC Battery Charger is a single port AC/DC charger that can handle 6S packs, is capable of 10 amp charge rates,...

ProTek 5342 2S High Current Charge/Balance Adapter (4mm to 5mm Solid Bullets) 10awg Wire 24"

ProTek 5342 2S High Current Charge/Balance Adapter (4mm to 5mm Solid Bullets) 10awg Wire 24" The ProTek R/C 2S High Current Charge/Balance Adapter is the solution you have been waiting for if you charge/discharge your 5mm bullet batteries at higher than...

ProTek RC 1S 12-Battery Parallel Charger Board (Ultra Micro/JST-PH)

ProTek RC 1S 12-Battery Parallel Charger Board (Ultra Micro/JST-PH) This is the ProTek R/C 1S 12-Battery Parallel Charger Board. Do you have a lot of micro flight batteries to charge? The ProTek R/C Parallel Charge Board will charge up to twelve 1S LiPo...

ProTek RC 2S High Current Charge/Balance Adapter (4mm to 4mm Solid Bullets) (10awg Wire) (24")

ProTek RC 2S High Current Charge/Balance Adapter (4mm to 4mm Solid Bullets) (10awg Wire) (24") The ProTek R/C 2S High Current Charge/Balance Adapter is the solution you have been waiting for if you charge/discharge your 4mm bullet batteries at higher...

ProTek RC 8267 "TruTorque" Shock Shaft Pliers

ProTek RC 8267 "TruTorque" Shock Shaft Pliers This is the ProTek R/C "TruTorque" Shock Shaft Pliers. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should...

ProTek RC 2240 Clear Double Sided Servo Tape Roll (1x40")

ProTek RC 2240 Clear Double Sided Servo Tape Roll (1x40") ProTek R/C Clear Double Sided Tape is a 40" long roll of the 1" wide clear double side tape that has become a must have for RC use. This tape is 1mil thick and is perfect for securing receivers,...

Protek RC 5x11x4mm Rubber Sealed "Speed" Bearings (10) PTK-10028

Protek RC 5x11x4mm Rubber Sealed "Speed" Bearings (10)    This is a pack of ten 5x11x4mm rubber sealed "Speed" 1/8 clutch bearings. ProTek R/C "Speed" bearings are high quality steel/chrome bearings designed for the R/C racing...